济南博度化工商贸有限公司
全国统一客服热线

15953163210

新闻动态

地址:

山东省济南市高新区奥体中心办事处

手机:

15953163210
新闻动态

当前位置:主页 > 新闻动态 >

碳钢反应釜的工作原理

2018/01/20

碳钢反应釜是采用碳钢(Q235)制成,由驱动装置、搅拌系统、密封部件、筒体、加热或冷却装置、支撑部件、各用途的管口等组成。

Carbon steel reactor is madeof carbon steel (Q235), is composed of a driving device, a stirring system,sealing components, a cylinder, a heating or cooling device, a support member,by application of the nozzle and other components.



碳钢反应釜的工作原理:

Workingprinciple of carbon steel reaction kettle:

需要进行混合与反应的各类介质按比例配方进入碳钢反应釜中,在一定的温度范围内配以搅拌系统的外力作用,让原材料转变成目标物即需要得到的产物。

The need for mixing andreaction of many kinds of media according to the proportion of formula intocarbon steel reactor, within a certain range of temperature with stirringsystem of external force, into the object to get the product to make conversionof raw materials.



搅拌器:混合反应是碳钢反应釜的核心技术,搅拌操作涉及流体的流动、传热和传质。搅拌器有低粘度搅拌器与高粘度搅拌器,桨式、开启涡轮式、圆盘涡轮式、推进式为低粘度搅拌器;高粘度搅拌器有螺带式、螺旋桨式、框式、锚式及我公司最新开发的刮壁式搅拌器。

Mixer: the mixed reaction isthe core technology of the carbon steel reactor www.gfanyingfu.com, which involves the flow, heattransfer and mass transfer of the fluid. Stirrer has low viscosity mixer withhigh viscosity mixer and paddle type, open type turbine, disk turbine type,push type mixer with low viscosity, high viscosity mixer with ribbon type,propeller type, box type, anchor type and my company the latest development ofwall scraping stirrer.



传热方式:外置夹套、内置盘管为最常用的加热或冷却方式。加热方式分电加热、导热油循环加热、蒸汽加热、远红外加热等,不同的工艺条件、不同的热源方式选用不同的加热方式。

Heat transfer mode: externaljacket, built-in coil for the most commonly used heating or cooling methods.Heating method is divided into electric heating, heat conduction oilcirculation heating, steam heating, far infrared heating, etc., differentprocess conditions, different heat source mode selection of different heating methods.



密封形式:真空度高或压力相对较高时为机械密封,一般情况下用填料密封即可。

Seal form: high vacuum orhigh pressure or high pressure for the mechanical seal, the general situationwith packing seal can be.



安装形式:放置于操作平台当中用耳式支座;作为单机设备使用直接安装于地面时即用支撑式或腿式支座。无论哪类安装形式都要求水平度。

Installation form: placed inthe operating platform which uses ear type bearings; as a stand-alone equipmentused directly installed on the ground when the support or leg support. Nomatter what type of installation is required for the level of.

上一篇:反应釜选购需要量体裁衣

下一篇:没有了

返回
网站首页| 关于我们 | 产品展示 | 荣誉资质 | 新闻动态 | 成功案例 | 联系我们 |

Copyright © 2002-2025 济南博度化工商贸有限公司 版权所有 电话:15953163210

山东省济南市高新区奥体中心办事处 技术支持:德州网站优化  ICP备案编号: